Didn't find what you're looking for?
Post a Buying Lead or contact
Hisupplier Customer Service Center
for help!
MIP EQUIPMENT SDN BHD
Tel:60-79846416Fax:60-79809463
|
MIP EQUIPMENT SDN BHD
|
Inquiry about Nylon Cable Ties,Self-Locking Nylon Cable Tie,Cable Tie [Malaysia]
| Update Time: | 2011-03-23 |
|---|---|
| Valid to: | Never Expired |
| Detailed Description: | There is some requirement information I would like to know about plastic cable tie produce from your company:- 1. The cable tie shall be made from high grade nylon materials resistant to heat, weather, light etc. The cable tie shall be designed in the form of a strap and buckle arrangement and self locking when clamped. 2. Where reference is made in this specification to British standards the recognized standards of other countries are acceptable provided that the requirements thereof are equivalent to, or an improvement on, the British Standards quoted for the particular purpose required. 3. Sizes and Dimensions I need: Size(a) Width: 7.6mm, Length: 150mm, Max clamp(dia): 32mm, Min clamp(dia): 10mm, Gripping: Double Size(b) Width: 7.6mm, Length: 240mm, Max clamp(dia): 61mm, Min clamp(dia): 26mm, Gripping: Double Size(c) Width: 7.6mm, Length: 380mm, Max clamp(dia): 105mm, Min clamp(dia): 55mm, Gripping: Double Size(d) Width: 8.0mm, Length: 550mm, Max clamp(dia): 160mm, Min clamp(dia): 110mm, Gripping: Double 4. The cable tie shall be protected against ultra violet rays. The humidity absorption shall be less than 1%. The tearing force of the cable ties should not be less than 280N for size(a), 510N for size(b), size(c) and 750N for size(d) 5. The cable ties shall withstand the action of bases, salty atmosphere, oil, grease and crude oil orgrivaties. 6. The cable ties shall be of good dielectric strength and provide satisfactory electrical insulation. 7. The cable tie shall be able to clamped without the need for any special tool. 8. Type test are intended to verify compliance of the design of the specified standard. The product shall have successfully passed the following type test conducted by recognized laboratory:- (a) Tearing force test: The cable tie shall not unblock from the tie when a separating force of the value in section 4(above) applied for 1 minute. Test report shall be given as evidence. (b) Ultra violet test: The cable tie shall undergo UV test meet the requirement of IEC 62275 or latest issue, or other equivalent International Specification. Test result for protection against ultra violet rays shall be given as evidence. 9. I would like to know each type of the size of plastic cable ties price and minimum requirement when ordering. |
Inquire Now
|
|
Contact Details
Mr. Alvin Ding
Fax:60-79809463
Fax:60-79809463
